|
|
|
Grillcraft Custom Products began manufacturing and designing custom grilles for the Sport Compact market in 1995. They have since developed there product line to now offer Sport Grilles for a variety of performance vehicles. There original grille design aggressively enhances the appearance of passenger motorcars as well as Sport Trucks and Suv's. There Reaserch & Development Team at GrillCraft is dedicated to offering you the most innovative automotive styling components in the industry. They take pride in our CRAFT and strive to satisfy there customers in every way possible. |
 |
How
easy is it to install?
Installation time is approximately 30 minutes. When installing a GrillCraft
Grille the front bumper cover must be removed on some models in order to install
the grille retaining screws. Some vehicles do not need bumper cover removal
for installation.
Does
the grille come with installation instructions?
Yes, GrillCraft Grilles come complete with easy to follow picture instructions
and all necessary -mounting hardware.
Can
the grille be stolen off the car easily?
No, in order to remove the grille screws you would need to remove the bumper
cover first to get access to them.
Do
I need to cut out the factory grille veins in order to install a grille on
my car?
No, GrillCraft Grilles are designed to fit in front of the factory grille
opening veins. There is no need
for cutting once the GrillCraft Grille is installed the factory Ville veins
will not be visible.
What
are the Grilles made of?
GrillCraft Grilles are made of hi strength steel.
Will
the grille rust easily?
No, GrillCraft Grilles are first cadium plated for rust protection then top
coated with a Hi build up powder coat process in either Silver, Black or white
colors
Will
the GrillCraft grille fit on my custom fiberglass front bumper?
No, GrillCraft Grilles are designed to fit the factory OEM bumper.
Is
the Grille colors matte or glossy finishes?
Our silver, black and white color is a glossy finish.
What
does the silver color look like?
Our Silver alloy coat finish looks identical too polished aluminum. When in
sunlight the finish resembles a bright chrome effect.
What
are the Honda upper grille shell frames made of?
Our upper grille kits for the late style Honda Civic/Accord vehicles are made
from a hi strength polyurethane molding process these parts resemble factory
plastic injection with extreme durability unlike cheap fiberglass copies on
the market buyer beware of cheap fiberglass upper grilles.
Can
I buy the grille material only?
No GrillCraft sells complete manufactured Grilles that are designed for your
vehicle to fit your vehicle.
 |
 |
 |
 |
| Here is the 1992-1995
Honda Civic lower grille kit Part# Hon-1103. Available in silver, black or white finishes |
Starts by removing the upper bumper cover screws as shown. | Next remove the screws located under the right & left splash shield | Next remove the screws located under the front section of the bumper cover. |
 |
 |
 |
 |
| Now bumper cover will slide off the car. | Install grille into bumper opening as shown. Using a sharp scribe mark the mounting pin center location | Use a 3/16-inch drill bit for drilling center-mounting pinholes. | Place grille into bumper opening. |
 |
 |
 |
 |
| Using a sharp scribe mark side mounting tab center holes and drill with 3/16 drill bit. | Attach supplied speed fasteners to grille tabs as shown. | Fasten side tab screws from the backside. | Repeat the process for mounting side vents. |
 |
|||
| Clean and Mean What a difference a GrillCraft Grille makes!!! |
GRiLLCRAFT Custom Products
11651 Pairie Avenue, Hawthorne, CA
90250
You may contact us by phone at 310-970-0300 or by fax at 310-970-0400.
We are available to receive your calls between the hours of 9:00 a.m. - 5:00
p.m. PST, Monday through Friday.
